：+86-13012867759 
：export86@sino-stainless-steel.com
Stainless Steel Suppliers
304 304L Hot Rolled Stainless Steel Plate
- Product Tag:
Hot Rolled Stainless Steel Plate - Thickness:
1.2mm – 200mm - Width:
600mm – 3200mm, the narrowed products pls check in strip or flat bar products - Length:
1000mm-12000mm - Finish:
NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish
- Looking for reliable stainless steel suppliers? Look no further than sino-stainless-steel.com.
Our 304 and 304L Hot Rolled Stainless Steel Plate products are of the highest quality, competitively priced, and backed by our exceptional customer service. Choose us for all your stainless steel needs.
Contents
I. Short Description for 304 304L Hot Rolled Stainless Steel Plate
The hot rolling is now as thin as 0.78mm. the surface of the hot-rolled plate has defects such as iron oxide scale and pitting. The hot rolled sheet has low hardness, easy processing and good ductility. Hot-rolled steel sheets, mechanical properties are far less than cold processing, and secondly forging processing, but have better toughness and ductility.
II. Sino Stainless Steel Capacity about 304 304L Hot Rolled Stainless Steel Plate
General Sino Stainless Steel Capacity about 304 304L Hot Rolled Stainless Steel Plate
(By: sino stainless steel suppliers)
- Product Tag:
Hot Rolled Stainless Steel Plate - Thickness:
1.2mm – 200mm - Width:
600mm – 3200mm, the narrowed products pls check in strip or flat bar products - Length:
1000mm-12000mm - Finish:
NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish
A. Sino Stainless Steel Capacity about 304L Hot Rolled Stainless Steel Plate
304L Stainless Steel
- Same Grade
from Different Country Standard
| Country Standard | Equivalent Grade to Stainless Steel 304L |
| USA (AISI/ASTM) | 304L |
| Japan (JIS) | SUS304L |
| European Union (EN) | X2CrNi18-9 |
| China (GB) | 00Cr19Ni10 |
(By: sino stainless steel suppliers)
304L Stainless Steel
- Chemical Component
ASTM A240
| Element | Chemical Composition (Weight %) |
| Carbon (C) | ≤0.03 |
| Silicon (Si) | ≤0.75 |
| Manganese (Mn) | ≤2.00 |
| Phosphorus (P) | ≤0.045 |
| Sulfur (S) | ≤0.03 |
| Chromium (Cr) | 18.0-20.0 |
| Nickel (Ni) | 8.0-12.0 |
| Nitrogen (N) | ≤0.10 |
304L Stainless Steel
-Mechanical Property
ASTM A240 :
| Property | Value |
| Tensile Strength | 70 ksi (485 MPa) min. |
| Yield Strength | 25 ksi (170 MPa) min. |
| Elongation | 40% min. |
| Hardness | HRB 88 max. |
| Density | 0.29 lbs/in3 (8.03 g/cm3) |
(By: sino stainless steel suppliers)
B. Sino Stainless Steel Capacity about 304 Hot Rolled stainless steel plate
304 Stainless Steel
-Same Grade From Different Country Standard
| Standard | Equivalent Grade to Stainless Steel 304 |
| USA (AISI/ASTM) | 304 |
| European Union (EN) | 1.4301 |
| China (GB) | 0Cr18Ni9 |
| Japan (JIS) | SUS304 |
(By: sino stainless steel suppliers)
304 Stainless Steel
Chemical Component
ASTM A240 :
| Element | Composition (Weight %) |
| Carbon (C) | ≤ 0.08 |
| Manganese (Mn) | ≤ 2.00 |
| Silicon (Si) | ≤ 0.75 |
| Phosphorus (P) | ≤ 0.045 |
| Sulfur (S) | ≤ 0.030 |
| Nickel (Ni) | 8.0 – 10.5 |
| Chromium (Cr) | 18.0 – 20.0 |
| Nitrogen (N) | ≤ 0.10 |
304 Stainless Steel
Mechanical Property
ASTM A240 :
| Property | Value |
|---|---|
| Tensile strength | 75 ksi (515 MPa) |
| Yield strength | 30 ksi (205 MPa) |
| Elongation | 40% |
| Hardness | Brinell: 201 |
| Modulus of elasticity | 28.0 x 10^6 psi (193 GPa) |
| Poisson’s ratio | 0.29 |
| Shear modulus | 11.2 x 10^6 psi (77.2 GPa) |
| Izod impact strength | 0.3 ft-lb (0.41 J) |
(By: sino stainless steel suppliers)
III. Common Applications for 304 304L Hot Rolled Stainless Steel Plate:
304 and 304L hot rolled stainless steel plates are versatile materials that find use in a variety of applications.
1. In the construction industry, they are commonly used for structural supports, handrails, and stairs due to their strength and durability.
2. In the food and beverage industry, 304 and 304L stainless steel plates are frequently used in the production of equipment such as tanks, piping, and storage containers, as they are highly resistant to corrosion and staining.
3. They are also used in the transportation industry, including aviation and automotive applications, due to their high strength and corrosion resistance.
4. Other common applications for 304 and 304L stainless steel plates include chemical processing, pharmaceuticals, and oil and gas exploration.
At Sino Stainless Steel, we are committed to providing our customers with top-quality products that meet their specific needs. As leading stainless steel suppliers, we offer competitive pricing, superior customer service, and unmatched expertise in the industry. -By: sino stainless steel suppliers
IV. Quality Assurance for 304 304L Hot Rolled Stainless Steel Plate:
As leading stainless steel suppliers, Sino Stainless Steel understands the importance of ensuring the highest quality standards in our products. We take pride in our commitment to providing superior quality stainless steel plates, including our 304 and 304L hot rolled stainless steel plates.
Our quality assurance process begins with sourcing only the highest quality raw materials from trusted stainless steel suppliers. We then utilize state-of-the-art equipment and technology to manufacture our plates, ensuring that each one meets or exceeds the required industry standards.
We also conduct rigorous quality control testing throughout the production process, including testing for strength, durability, and resistance to corrosion. Our quality assurance team is highly trained and experienced in identifying any potential defects or issues, ensuring that our customers receive only the best possible products.
In addition to our commitment to quality, we also prioritize customer service and satisfaction. Our knowledgeable and experienced team is always available to answer any questions and provide guidance on the best products and solutions for your specific needs.
Choose Sino Stainless Steel as your trusted stainless steel suppliers for your next project. Contact us today to learn more about our products and services.
(MTC – sino stainless steel suppliers)
FAQs for 304 304L Hot Rolled Stainless Steel Plate:
I. 304 304L Hot Rolled Stainless Steel Vs 304 304L Cold Rolled Stainless Steel
A. 304 304L Hot Rolled Stainless Steel Vs 304 304L Cold Rolled Stainless Steel
(what is the main difference between 304 304L hot rolled steel plates and 304 304L cold rolled steel sheets？)
Cold rolling and hot rolling are two different rolling technologies. As the name suggests, cold rolling is done in the case of steel at normal temperature. The hardness of this steel is large. Hot rolling is the steel is made at high temperatures, Detailed:
The hot rolled sheet has low hardness, easy processing and good ductility.
The cold rolled sheet has high hardness and is relatively difficult to process, but is not easily deformed and has high strength.
The hot rolled sheet has relatively low strength, the surface quality is almost poor (having low oxidation and smoothness), but the plasticity is good, generally medium and thick plate. Cold rolled sheet: high strength, high hardness, high surface finish, generally thin sheet, can be used for stamping board.
Hot-rolled steel sheets, mechanical properties are far less than cold processing, and secondly forging processing, but have better toughness and ductility.
Cold-rolled steel sheet has a certain degree of work hardening, low toughness, but can achieve a good yield ratio, used for cold-bending spring pieces and other parts, and because the yield point is closer to the tensile strength, there is no danger during use. Predictability, an accident is likely to occur when the load exceeds the allowable load.
– By: sino stainless steel suppliers
B. 304 304L Hot Rolled Stainless Steel Vs 304 304L Cold Rolled Stainless Steel
(Typical Different about Hot rolled 304 304L and Cold Rolled 304 304L Description)
- The surface of the cold-rolled sheet has a certain degree of gloss. It is smooth to the touch and is similar to the very common steel cup used to drink water.
- If the hot-rolled sheet is not pickled, it is similar to the surface of many ordinary steel sheets on the market. The surface with rust is red, and the surface without rust is purple-black (iron oxide scale). – By: sino stainless steel suppliers
C. 304 304L Hot Rolled Stainless Steel Vs 304 304L Cold Rolled Stainless Steel
(The Performance Advantages of Cold Rolled 304 304L and Hot Rolled 304 304L)
(1) The precision is higher, and the difference in thickness of cold-rolled strip steel does not exceed 0.01~0.03mm.
(2) The size is thinner, the cold-rolled thinnest can be rolled with a steel strip of 0.001 mm; the hot rolling is now as thin as 0.78 mm.
(3) The surface quality is superior, and the cold-rolled steel plate can even produce a mirror surface; while the surface of the hot-rolled plate has defects such as iron oxide scale and pitting.
(4) Cold-rolled sheets can be adjusted according to user requirements such as tensile strength and process properties such as stamping properties. – By: sino stainless steel suppliers
VS
– By sino stainless steel suppliers
II. 304L Vs 304 Stainless Steel
When it comes to choosing between 304 and 304L stainless steel, it’s important to understand the differences and applications of each.
First, let’s look at the similarities. Both 304 and 304L are austenitic stainless steels, meaning they have a high resistance to corrosion and oxidation. They both contain the same amount of chromium and nickel, with 18% chromium and 8% nickel.
The main difference between the two is the carbon content. 304L has a lower carbon content, typically around 0.03% or less, while 304 has a carbon content of up to 0.08%. This lower carbon content makes 304L more weldable and reduces the risk of sensitization, which can lead to corrosion in certain environments.
304L is often used in applications where welding is required, such as in the manufacturing of pressure vessels, chemical equipment, and pipelines. It is also commonly used in the food and beverage industry, as it is easily sanitized and does not impart flavors or odors.
304, on the other hand, is often used in applications that require higher strength and hardness, such as in the manufacturing of fasteners, pumps, and valves. It is also commonly used in the construction industry, particularly for architectural applications.
At Sino Stainless Steel, we offer both 304 and 304L hot rolled stainless steel plate products of exceptional quality and durability. As leading stainless steel suppliers, we take great pride in our products and our unmatched expertise in the industry. Choose us for superior customer service, competitive pricing, and reliable delivery. – By: sino stainless steel suppliers
If you’re looking for high-quality 304 stainless steel, be sure to choose reputable stainless steel suppliers like Sino Stainless Steel. With our superior customer service, competitive pricing, and expertise in the industry, you can trust us to provide the best products for your needs.
Stainless steel is known for its corrosion-resistant properties, but like all materials, it is not completely immune to rusting.
However, 304 stainless steel is one of the most commonly used grades for its excellent corrosion resistance in a wide range of environments.
The corrosion resistance of 304 stainless steel is due to the presence of chromium, which forms a passive oxide layer on the surface of the material, preventing it from reacting with the environment.
As long as this oxide layer remains intact, 304 stainless steel is resistant to rust.
However, in certain environments, such as saltwater or acidic environments, the oxide layer can be compromised, leading to rusting of the material.
Proper maintenance and care can help prevent rusting of 304 stainless steel.
By: sino stainless steel suppliers
304 stainless steel is a non-magnetic alloy of stainless steel that contains both chromium and nickel.
It is known for its excellent corrosion resistance, durability, and strength. In general, stainless steel is considered non-magnetic because it has a low susceptibility to magnetism.
However, the magnetism of stainless steel can vary based on its composition, microstructure, and processing methods.
304 stainless steel is considered non-magnetic in its annealed state but may become slightly magnetic after cold working or welding. – By: sino stainless steel suppliers
As leading stainless steel suppliers, we offer a wide range of high-quality 304 stainless steel products that are suitable for various applications. Contact us to learn more about our products and services.
Get A Free Quote
Trust us to be your excellent stainless steel suppliers, we will answer in 12 hours. Or you can send an emali to us directly. (export81@huaxia-intl.com)
Related Posts
Low-carbon Steel Wire: Applications, Properties, and Production Process
With the increasing global awareness of environmental protection, low-carbon steel wire, as a new type of environmentally friendly material, has gradually found widespread application in
A312/A312M Stainless Steel Tube
Related posts: stainless steel Hexagonal Bar Stainless Steel Angle Bar Stainless steel Channel Bar
S31803 Hot Rolled Stainless Steel Plates
Looking for the best stainless steel supplier?
Choose sino-stainless-steel.com for all your needs!
Our 31803 Hot Rolled Stainless Steel Plate offers top quality at competitive prices, backed by exceptional customer service.
S2507 Cold Rolled Stainless Steel Sheets
S2507 Cold Rolled Stainless Steel Sheets Previous Next Short Description: S2507 Cold Rolled Stainless Steel Sheets are high-strength and high-corrosion-resistant stainless steel sheets, also known
201 Hot Rolled Stainless Steel Plate
Looking for top-quality stainless steel suppliers?
Look no further than Sino Stainless Steel! Our 201 Hot Rolled Stainless Steel Plate products are known for their exceptional quality and durability.
Choose us for our superior customer service, competitive pricing, and unmatched expertise in the industry.