Sino Stainless Steel Capacity about409 409L cold rolled stainless steel sheets, 409 409L CRC

Thickness: 0.2mm – 8.0mm

Width: 100mm – 2000mm

Length: 500mm – 6000mm

Pallet weight: 25MT

Finish: 2B,2D

409 Similar grade from different country standard(409 409L cold rolled stainless steel sheets)

S40930  1.4512  0Cr11Ti

409 Chemical Component(409 409L cold rolled stainless steel sheets) :

C：≤0.08 ，Si ：≤1.0 　Mn ：≤1.0 ， S ：≤0.03 ，P ：≤0.045, Cr ：10.5～11.7 ，Ni ：0.5 Max，

Ti: 6xC – 0.75

409 Mechanical Property (409 409L cold rolled stainless steel sheets):

Tensile strength :  > 380 Mpa

Yield Strength :  >205 Mpa

Elongation (%):  > 20%

Hardness: < HRB88

Bending Angle: 180 degree

409L Same grade from different country standard(409 409L cold rolled stainless steel sheets)

S40903  00Cr11Ti  022Cr11Ti SUH409L   

409L Chemical Component :

C：≤0.03 ，Si ：≤1.0 　Mn ：≤1.0 ， S ：≤0.03 ，P ：≤0.045, Cr ：10.5～11.7 ，Ni ：0.5 Max，

Ti: 6xC – 0.75

409L Mechanical Property :

Tensile strength :  > 380 Mpa

Yield Strength :  >205 Mpa

Elongation (%):  > 20%

Hardness: < HRB88

Bending Angle: 180 degree

Description about normal stainless steel sheets(409 409L cold rolled stainless steel sheets)

Stainless steel does not cause corrosion, pitting, rust or wear. Stainless steel is also one of the strongest materials in building metal materials. Because stainless steel has good corrosion resistance, it enables structural components to permanently maintain engineering integrity. Chromium-containing stainless steel also combines mechanical strength and high extensibility, making it easy to machine parts to meet the needs of architects and structural designers.

Application about  stainless steel sheet(409 409L cold rolled stainless steel sheets)

Most of the requirements for use are to maintain the original appearance of the building for a long time. When determining the type of stainless steel to be used, the main considerations are the required aesthetic standards, the corrosive nature of the location atmosphere, and the cleaning system to be used. However, more and more applications are only seeking structural integrity or water impermeability. 

For example, the roof and side walls of industrial buildings. In these applications, the cost of building the owner may be more important than aesthetics, and the surface is not very clean. The use of 304 stainless steel in a dry indoor environment works reasonably well. However, in rural areas and cities to maintain their appearance outdoors, they need to be cleaned frequently. 

In heavily polluted industrial areas and coastal areas, the surface can be very dirty and even rusted. However, in order to obtain an aesthetic effect in an outdoor environment, nickel-containing stainless steel is required. 

Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other architectural applications, but in aggressive industrial or marine atmospheres, 316 stainless steel is preferred. The advantages of using stainless steel in structural applications are now well recognized. There are several design guidelines including 304 and 316 stainless steel. Because “duplex” stainless steel 2205 has a good resistance to atmospheric corrosion and high tensile strength and elastic strength, this steel is also included in the European guidelines. 

In fact, stainless steel is manufactured in full-standard metal shapes and sizes, and there are many special shapes. The most commonly used products are made of sheet and strip steel, and special products are produced from medium and heavy plates, for example, hot-rolled structural steel and extruded structural steel. There are also round, elliptical, square, rectangular and hexagonal welded or seamless steel tubes and other forms of products, including profiles, bars, wires and castings.

Cold Rolled Stainless Steel Sheet
Cold Rolled Stainless Steel Sheets
Stainless Steel Cold Rolled Sheet